The most exotic e-bike ever created
Built in limited numbers and hand-assembled in Simi Valley, California.
Real 24k gold, applied by hand to a custom painted carbon frame.
Carbon fiber, 24K gold, CNC titanium. Every part the best available, and the rest made by HPC.
Black and 24k gold
No compromise
Veined with real 24k gold
The Omega is our answer to a simple question: what happens when you stop compromising? Every part was chosen as the best available, then we made the rest ourselves. Hand-applied 24k gold veins run across a black carbon frame, and titanium shows up everywhere it counts.
A full-carbon frame, finished in 24k gold.
Gold
24k
Frame
Full carbon
Travel, front / rear
170 / 155 mm
Warranty
5 years
The build
Titanium where it counts
Where we couldn't buy the best, we made it. HPC developed the titanium stem, crank arms and clamps in house for the Omega, then added a 5DEV 38T titanium chainring, a titanium cassette, a titanium seatpost clamp and titanium headset spacers. Lighter than steel, stronger than aluminum, and finished to last a lifetime.
The best available, everywhere else
Every other part was chosen as the best available. Suspension from PUSH Industries. Shimano XTR four-piston brakes on 203 mm Shimano Ice Technologies rotors. We Are One Fuse carbon rims laced by hand to DT Swiss 240 hubs with Sapim bladed spokes, wrapped in Schwalbe Albert Radial tires. A USA-made White Industries headset holding it all together.
The parts list
Suspension
PUSH Industries
Brakes
Shimano XTR 4-piston, 203 mm rotors
Rims
We Are One Fuse carbon
Rear hub
DT Swiss 240 DEG DF
Tires
Schwalbe Albert Radial
Headset
White Industries, USA made
Handlebar
ENVE M7 Riser, 800 mm
Grips
RevGrip Pro, flanged bar ends
Dropper
Fox Transfer Neo
Saddle
WTB Volt, carbon rails
Pedals
Yoshimura, black and gold
Drivetrain
Shimano XTR, SRAM XX or Rohloff E-14
The details
DT Swiss 240 DEG DF rear hub
The rear wheel turns on DT Swiss's 240 DEG DF. Its 90-point Ratchet DEG system engages almost the instant you push on the pedals, and Degrees of Freedom (DF) technology stops pedal kickback as the rear suspension works through rough ground.
Engagement
90 points
Anti pedal kickback
DF
Yoshimura pedals in black and gold
Yoshimura flat pedals, finished in black and gold to match the frame's 24k gold veins, spin on HPC's in-house titanium crank arms.
ENVE M7 Riser Bar
An ENVE Composites M7 Riser Bar with a 35.0 mm clamp, held by HPC's own titanium stem.
Width
800 mm
Rise
25 mm
RevGrip Pro grips
RevGrip Pro grips with flanged bar ends take the sting out of rough trail and keep your hands planted.
Fox Transfer Neo dropper
A Fox Transfer Neo dropper post carries a WTB Volt saddle on carbon rails.
Shimano XTR four-piston brakes
Shimano's flagship four-piston XTR brakes clamp 203 mm Shimano Ice Technologies rotors at both ends.
Rotors
203 mm
Drive system
2400 watts, custom built
A custom 2400W M560 V2 motor with 200+ Nm torque, the most powerful motor ever put into a Trailblazer chassis. With 24K gold featured throughout the frame, we felt 2.4kW of power was only prudent!
Peak torque
200 Nm
Power
2400W
Motor
Custom M560
Gold, from every angle.
Hand-applied 24k gold catches the light as you ride.
Triple sensor response
One torque sensor and two speed sensors read what your legs are doing and answer straight away, so the power comes in when you ask for it and not a beat later. Five assist levels cover everything from a quiet spin to full send.
Battery and charging
1050Wh, made in the USA
The Omega carries HPC's largest battery, a 1050Wh pack built in the USA, for up to 52 miles of range.
Battery
1050Wh
Range, up to
52 miles
Top speed
Up to 42 MPH
Charged by the Satiator
Every Omega ships with the Satiator, a programmable smart charger. Set how fast it charges and how full it fills, from a quick top-up before a ride to a gentler partial charge for storage.
Geometry
Mullet, 170 mm, built to charge
The Omega rides on Trailblazer Pro geometry in a mullet setup: a 29" front wheel, a 27.5" rear and a 170 mm PUSH Industries fork, with 155 mm of rear travel. Medium, Large and XL frames fit riders from 5'4" to 6'2" and up.
Head tube angle
63.9°
The 170 mm fork and mullet wheels settle the head angle at 63.9°, calm and planted on steep, rough descents.
Seat tube angle
73.5°
A 73.5° seat angle keeps you over the cranks when the trail points back up.
Chainstay length
460 mm
460 mm chainstays keep the rear wheel planted under 2400 watts and stable at speed.
Wheelbase
1262 mm
1262 mm between the axles on a size Large, with a 29" wheel up front and a 27.5" out back.
Reach
459 mm
459 mm of reach on a size Large. Medium is 431 mm and XL is 478 mm.
63.9°
73.5°
460 mm
1262 mm
459 mm
PUSH Industries suspension
170 mm up front and 155 mm out back, on a mullet wheel setup with Schwalbe Albert Radial tires, 29 x 2.5 front and 27.5 x 2.6 rear.
Hand-assembled in Simi Valley, California
Every Omega is built to order and assembled by hand in our USA facility, then set up for its owner before it leaves.
Built for the most discerning rider
For the rider who doesn't compromise either. The Omega is built in limited numbers, each one to order.
5 years on everything
An exclusive 5 year warranty covers the whole bike: frame, motor, controller, battery, charger and display.
See every angle
Proven where it counts
HPC has built high-performance electric bikes for more than 18 years, and has proudly served over 30,000 customers.
Join the Omega list
Range is for the 1050Wh battery and varies with rider weight, terrain and assist level. Geometry figures are for a size Large in the mullet setup with a 170 mm fork.