Charge any Reention 3-pin e-bike battery — including every HPC Trailblazer — with your existing XT60 charger. Built in our Simi Valley, California facility from silicone-insulated wire and quality XT60 connectors. No more juggling proprietary chargers for every pack.
What This Adapter Does
The Reention 3-pin charge port is one of the most common connectors on the market — found on Dorado, Polly, Shark, Hailong, and dozens of other popular e-bike battery cases. But if you've upgraded to an XT60-output charger (or you're running a multi-battery setup), you need a clean way to bridge the two.
This adapter solves that. Plug your XT60 charger into the female XT60 end, plug the 3-pin male end into your battery's charge port, and you're done. No splicing, no soldering, no compromise on current handling.
Built For The HPC Trailblazer Lineup
This is the correct charge adapter for the entire HPC Trailblazer family — Trailblazer, Trailblazer Pro, Trailblazer AT, and Trailblazer AT Pro. All Trailblazer batteries use the Reention 3-pin charge port, so if you've picked up an XT60-output charger (or you're running a multi-bike setup), this is the bridge you need.
It also works with any other e-bike battery that uses a standard Reention 3-pin charge port — including most Dorado, Polly, Shark, and Hailong-style cases. If you can see three round pins arranged in a triangle inside the plug housing, you're compatible.
Not sure if your battery uses a Reention 3-pin port? Call us at (818) 734-1600 or email support@hpcbikes.com and we'll confirm before you order.
Specifications
| Input Side |
XT60 Female (accepts XT60 male charger output) |
| Output Side |
Reention 3-Pin Male (plugs into battery charge port) |
| Wire Gauge |
16 AWG silicone-insulated copper |
| Current Rating |
Up to 10A continuous (charging applications) |
| Voltage Rating |
Compatible with 36V, 48V, 52V, and 60V Reention packs |
| Cable Length |
Approx. 6 inches |
| Assembly |
Hand-assembled in Simi Valley, California |
| Polarity |
Pre-tested and verified before shipping |
Why Buy From HPC
-
Polarity verified: Every adapter is bench-tested before it ships. Reversed polarity destroys batteries — we make sure that never happens.
-
Quality silicone wire: 16 AWG silicone-insulated copper handles standard e-bike charge currents (typically 2–8A) with margin to spare, and stays flexible in cold weather where PVC-jacketed adapters get stiff.
-
Real support: Built and shipped from California by people who actually ride and build e-bikes. Questions get answered the same day.
-
17+ years in the business: Hi Power Cycles has been building premium e-bikes and components since 2008.
Common Use Cases
- Using an aftermarket XT60-output charger (faster charging, higher quality) with a stock Reention battery case
- Charging multiple battery types from a single charger
- Field charging from a portable XT60 power source or solar setup
- Replacing a damaged or lost original charger plug without rewiring the charger
Important Safety Notes
- This is a charge-only adapter — do not use for discharge or motor power applications.
- Always match your charger's voltage to your battery's voltage (e.g., 52V charger for 52V pack). This adapter does not convert voltage.
- Never connect the XT60 end directly to another battery — this is a charger-to-battery interface only.
Need a Charger Too?
If you're upgrading your charge setup, check out our XT60-output lithium battery chargers — fast, smart, and built to match.
